Sink table with shelf – bolted, depth 600 mm, HENDI, Profi Line, Right side, 800x600x(H)850mm

Bolted construction for self-assembly, enabling easy transport and storage. Made of stainless steel. The chamber is bolted seamlessly into the countertop, pressed from one sheet of stainless steel. Sink dimensions: 400x400x(H)250 mm. Standard embossing in the bottom for the siphon: ø50 mm. Tap hole: ø30 mm. 10 mm embossing of the worktop to prevent water from spilling out. The approximate permissible load on the countertop is 70 kg/m². Splashback 40 mm high to protect the wall against stains. The rear legs of the table are moved away from the wall by 50 mm to facilitate wall installation. Legs made of 40x40 mm profiles. Adjustable feet in the range: +25/-5 mm.
Shelf without filling, non-adjustable – distance from the floor to the lower edge of the shelf is 160 mm.

Bolted construction for self-assembly, enabling easy transport and storage. Made of stainless steel. The chamber is bolted seamlessly into the countertop, pressed from one sheet of stainless steel. Sink dimensions: 400x400x(H)250 mm. Standard embossing in the bottom for the siphon: ø50 mm. Tap hole: ø30 mm. 10 mm embossing of the worktop to prevent water from spilling out. The approximate permissible load on the countertop is 70 kg/m². Splashback 40 mm high to protect the wall against stains. The rear legs of the table are moved away from the wall by 50 mm to facilitate wall installation. Legs made of 40x40 mm profiles. Adjustable feet in the range: +25/-5 mm.
Shelf without filling, non-adjustable – distance from the floor to the lower edge of the shelf is 160 mm.